Certified Welding Inspector – Taylor, Texas

LocationTaylor, Texas
CertificationCWI / CSWIP
Employment TypeFull-Time / Long-Term
In order to apply for this position, applicants MUST be authorized to work in: USA

Roles & Responsibilities

  • Codes, standards and specifications: Interpretation of the intent and ensuring the requirements of codes, standards and specifications are met.
  • Welding procedures: Ensuring that a procedure is available, has been approved and is being employed in production.
  • Witnessing of welder and procedure approval tests: Witnessing the preparation of test plates and destructive tests and verifying compliance with appropriate standards and specifications.
  • Pre-weld inspection: Verification that dimensions, fit-up and weld preparations are in accordance with specifications.
  • In-process welding inspection and surveillance: Surveillance during welding to verify compliance with specified procedures including any pre­heat, interpass temperature control and post heat require­ments.
  • Inspection and Test Plans: Assistance and agreement with the preparation of Inspection and Test Plans (ITP’s)
  • Post-weld heat treatment: Verification, when required that post weld heat treat­ment has been conducted in accordance with specification requirements.
  • Post-weld visual inspection: Visual inspection and dimensional check of completed weldment against specification require­ments and drawings.
  • NDT reports: The study and cognizance of NDT results on any welding work for which the welding inspector is responsible. Where the duties of the welding inspector include using NDT methods such as liquid penetrant, magnetic particle, radiography or ultrasonic inspection then it is suggested that he/she obtains certification in accordance with the related approval schemes.
  • Reports: Evaluation of and preparation of inspection reports for the employer or the client.

Minimum Requirements

  • AWS CWI
  • Structural Steel / Pipe inspection experience
  • Third Party Vendor Surveillance experience

Desired Qualifications

  • NDT certifications: Level II MT and UT
  • Coating certification

Work Location

  • Taylor, Texas

Schedule

  • Scheduled to begin October 2022 for 6 – 9 months, possibly longer
  • 5 – 6 days per week / 8 – 10 hours per day

 Compensation / Status

  • Contract / 1099
  • $40 – $45 USD per hour worked / travelled
  • Mileage reimbursed at IRS rate
  • No per diem / No expenses
To apply, email ppijobs@ppiquality.com

𝘊𝘖𝘕𝘚𝘌𝘕𝘛 𝘛𝘖 𝘜𝘚𝘌 𝘗𝘌𝘙𝘚𝘖𝘕𝘈𝘓 𝘐𝘕𝘍𝘖𝘙𝘔𝘈𝘛𝘐𝘖𝘕 𝘉𝘺 𝘳𝘦𝘴𝘱𝘰𝘯𝘥𝘪𝘯𝘨 𝘵𝘰 𝘵𝘩𝘪𝘴 𝘦𝘮𝘢𝘪𝘭 𝘰𝘳 𝘢𝘥𝘷𝘦𝘳𝘵𝘪𝘴𝘦𝘮𝘦𝘯𝘵, 𝘺𝘰𝘶 𝘢𝘳𝘦 𝘨𝘪𝘷𝘪𝘯𝘨 𝘶𝘴 𝘱𝘦𝘳𝘮𝘪𝘴𝘴𝘪𝘰𝘯 𝘵𝘰 𝘤𝘰𝘯𝘵𝘢𝘤𝘵 𝘺𝘰𝘶 𝘧𝘰𝘳 𝘫𝘰𝘣 𝘱𝘭𝘢𝘤𝘦𝘮𝘦𝘯𝘵 𝘱𝘶𝘳𝘱𝘰𝘴𝘦𝘴. 𝘠𝘰𝘶 𝘮𝘢𝘺 𝘢𝘭𝘴𝘰 𝘣𝘦 𝘨𝘳𝘢𝘯𝘵𝘪𝘯𝘨 𝘶𝘴 𝘱𝘦𝘳𝘮𝘪𝘴𝘴𝘪𝘰𝘯 𝘵𝘰 𝘴𝘵𝘰𝘳𝘦 𝘺𝘰𝘶𝘳 𝘤𝘰𝘯𝘵𝘢𝘤𝘵 𝘪𝘯𝘧𝘰𝘳𝘮𝘢𝘵𝘪𝘰𝘯 𝘧𝘰𝘳 𝘴𝘶𝘤𝘩 𝘱𝘶𝘳𝘱𝘰𝘴𝘦𝘴. 𝘠𝘰𝘶 𝘮𝘢𝘺 𝘶𝘯𝘴𝘶𝘣𝘴𝘤𝘳𝘪𝘣𝘦 𝘰𝘳 𝘸𝘪𝘵𝘩𝘥𝘳𝘢𝘸 𝘺𝘰𝘶𝘳 𝘤𝘰𝘯𝘴𝘦𝘯𝘵 𝘧𝘰𝘳 𝘰𝘶𝘳 𝘶𝘴𝘦 𝘰𝘧 𝘺𝘰𝘶𝘳 𝘤𝘰𝘯𝘵𝘢𝘤𝘵 𝘪𝘯𝘧𝘰𝘳𝘮𝘢𝘵𝘪𝘰𝘯 𝘣𝘺 𝘦𝘮𝘢𝘪𝘭𝘪𝘯𝘨 𝘱𝘳𝘪𝘷𝘢𝘤𝘺@𝘲𝘢𝘳𝘦𝘱𝘰𝘳𝘵𝘦𝘳.𝘤𝘰𝘮. 𝘗𝘭𝘦𝘢𝘴𝘦 𝘴𝘦𝘦 𝘰𝘶𝘳 𝘗𝘳𝘪𝘷𝘢𝘤𝘺 𝘗𝘰𝘭𝘪𝘤𝘺 𝘧𝘰𝘳 𝘮𝘰𝘳𝘦 𝘪𝘯𝘧𝘰𝘳𝘮𝘢𝘵𝘪𝘰𝘯.